Видео

Do I need to use the circlips that clip in to stop the collet moving backwards when using these? Toolstation don't stock them...

Fine and dandy if the wireless receiver actually resets or goes into pairing mode. It has just dropped all the wireless stats. Shite system. I've had to replace both the control centre and the manifold. Utter crap system.

In reality The insert is so thick with its rubber end that the epdm O ring sits only 3mm away from the cut end of the pipe compared with Hep20 epdm O ring that sits 10mm away from the end of the cut Pipe Plus so many plumbers or Diy users never tighten the compression sections therefore not securing the Collet correctly and under high pressure would cause the pipe to pop out, where as Hep20 fittings already have that secured Collet seal to stop any incident like that occurring. 1:29

When soldering a seperate Copper pipe next to the JG Fitting ie a stop end on a mains copper pipe Is the plastic fire proof ?

That looks very good. I got rather put off push-fit when using a different brand back in the early 1980s - one with a rather high insertion force that meant I failed to seat one fitting correctly. It let go as I was inspecting for leaks with a mains-powered line light. I reckon I used up one of my nine lives that day! So, I'm going to give these a go but the mains line-light is still something I won't use. 🙂

Thanks John

Iv never used an insert 😂.

Nice! Now let's travel forward for about 25 years and we re back in 2024. 😂

nice products

en.wikipedia.org/wiki/John_Guest_(company)

What’s the globe symbol under the wireless symbol on the left?

Absolutely shit system , fucking awful

the worst prouct known to humankind.. designed by a 2 year old .. pathetic unesseary complicated, we get complaints every time we fitted these, id sacked the people if it were my company who came up with this and the weather symbols for heating leel.. jesus WTF were you idiots thinking .. johd guest are now one of the worst companies to deal with since they sold out .. any way

Tego sterownika nie wymyślił zaden inżynier tylko idiota

Would someone PLEASE tell me how to wake up the screen. It is totally unresponsive to any tapping or long holding. I can see the icons but nothing lights up. This is so complicated.

An over complicated system - designed by engineers for engineers. Please have someone else remake these videos with professional presenting skills and a less droning voice. We actually don't have some of our underfloor heating on because we can't get the thermostats to pair/work, and some of them use batteries more quicker than others. Unfortunately I wouldn't recommend this system.

Do I need to use collit clips aswell? Or are they just for the pushfits thats don't have the rotating lock.

No wonder the fella is sweating, it’s like defusing a bomb. A proper piece of dog poop

Yes they are shit. I just want a on off button it’s freezing

Hello John Guest - Europe Owner, I saw your RUclips channel, you upload very nice videos on your channel constantly. Your main objective is to grow your business. So you've chosen RUclips to promote your business. If you want to grow your business, do SEO (Search Engine Optimization) first. SEO work is to get your video organically to the audience. Because RUclips algorithm works on keywords, but your channel has no keywords! SEO importance will help your video reach the right people and increase views. Your business will grow when the audience watches your videos. If you want to do SEO on your channel, I can help. I am an SEO expert. Thank you, have a nice day

Don’t you need to use a super seal on these?

it cannot opn as you suggested

What’s stopping the heat from the screed system going downwards into the slab ?

Excellent product, used JG fittings in recent installation of water heater including PRV, expansion tank etc in very confined undersink area, completed job in well under half the time it would take with copper. Perfect.

Can this be used on a suspended timber floor?

And now: Time trial: Long life leak proofness! ;)

important video.great job❤

Could you use the JG water pipe speed fitting for pneumatics?

Working fine for me!

Shocking, bad video, complicated to use, had John guest chap out and he said it’s too complicated for most people but he didn’t care as he only had 18months to go before he got his pension, this system is so bad I. Going to rip it all out! What a waste of money🙈

I truly regret letting the plumber install this stat. It’s just impossible to understand and I’ve got A levels. As someone else commented, I think I’ll set “snowflake” to 15 degrees and leave it there.

The worst piece of kit ever installed in my house. WTF does “moon level” mean? Even after this video I have no confidence in having set this thing up properly. It’s utter crap.

I have absolutely no idea how to make this system produce heat. I think I will move into an hotel.

Can anyone please explain what the sunny, moon and cloudy “levels” mean? Am I setting the temperature that I want, or the temperature that it has to be for the heating to come on?

without a shadow of a doubt the most over frustratingly , complicated illogical thermostat ever.. who on earth signs off on this utter garbage .. pathetic design logic.. and im an installer !!! avoid avoid avoid and your life will be better for it !

We've had the system installed to radiators using trvs only, no under floor at all. We don't even have a wiring box!! Spent 2 weekends trying to re pair a single valve that's stopped working. Can anybody help???

is it possible to connect this system to home assistant?

I took the plunge and used JG fittings and pipe on a burst pipe recently and couldn’t quite believe how easy it was to use. It looks and feels like it’s been well made and will last! Top work JG, nice product 👍👍

Stupidly complicated. No thought for user experience at all.

Getting error ID from 6 to 10 . What to do ?)

20yrs in IT and ive never seen such an appalling user experience, still not fathomed it...what the fuck is "Sunny Level Setting?" Who created this garbage

Far too complicated for no good reason

Please explain how to unlock a locked JG control panel.

Please would you do a film explaining how to unlock a locked JG control panel? It's not explained in the manual.

That video was almost really good, but the illustration did not show why the stainless steel teeth are forced to dig into the pipe when tightening the fitting.